NOTE: Product Images are shown for illustrative purposes only and may differ from the actual product.
NOTE: If you buy any PNP Drone from our website and any part of your drone gets damaged while you are using it then we will arrange those parts for you and if that parts manufacturing has been stop then we will provide you reference product.
DON’T JUST FLY DRONES, CRASH THEM TOO BECAUSE WE ARE HERE FOR YOU.
Bee35 3.5 inch Cinewhoop 4-6s Analog FPV Drone – PNP
Features:
• Universal GOPRO installation bracket so that you can use any GoPro Camera and Action Camera.
• The aviation-grade aluminum headpiece provides excellent protection for the lens
• Ultra-strong injection-molded protective ring with a cutout for simple LED light strip installation.
• Connects to the flight controller without disassembling the drone, supporting Type-C interfaces.
• Configure your FC and ESC via Bluetooth on your phone and experience wireless full configuration anytime & anywhere.
Specification:
Bee35 PRO 3.5 inch O3 Cinewhoop Frame
Model: 3.5 inches Frame
Wheelbase: 153mm
TPU Colour: yellow
Prop size: 90mm
SpeedyBee F405 Mini BLS 35A Stack
MCU: STM32F405
USB Port Type:
Supported Fc Firmware: BetaFlight(Default), INAV
UART: 6sets
Power input: 3-6s lipo
Firmware: BLHeli_S J-H-40
Continuous Current: 35A * 4
Burst Current: 45A(5seconds)
ESC Protocol: DSHOT300/600
Manual
TX800 VTX
Output Power: PIT/25mW/200mW/400mW/800mW
Input Voltage: 3.7V-5V
Antenna: MMCX
Manual
1500TVL FPV Camera
Image Sensor: 1/3'' CMOS
Horizontal Resolution: 1500TVL
Signal System: NTSC/PAL
Power: DC 5-30V
Dimensions: 19mm
Speedy Bee 5.8 GHz SMA Antenna V2
Gain: 2.82dBi
Frequency: 5.8GHz
Polarization: RHCP
Connector: SMA
SpeedyBee 2006-1950KV 4S-6S Motor
Model: SB 2006
KV: 1950KV
Input Voltage: 6S
Colour: Black
Propeller
Size: 90mm
Type: Tri-Blade
Colour: Clear Grey
Wire Protector Tube
Dimension: 98*10MM
Recommended Parts:
Goggles support – Analog
Battery Support 4S-6S Lipo (suggested: 650mah-1500mah)
Propeller
Tools
PNP stands for "Plug and Play" or "Plug and Power," indicating that most of the essential components are already installed and connected, it usually includes the airframe, motors, propeller, electronic speed controllers (ESCs), flight controller, FPV camera, and video transmitter. However, it does not include the radio transmitter & receiver, FPV goggles, battery, charger, And GPS If you want to buy all these things then you will have to buy them separately.
SkyRC.in also provide Pre-build (ready-to-fly) Drones if you are interested please follow (3 steps).
Step 1: Select your favourite Drone Kit.
Step 2: Copy the link to that Product.
Step3: Share the link to our customer support on WhatsApp(9142884517).
Our Customer Support will reply as soon as possible and they will explain you further details.
A ready-to-fly (RTF) drone is a complete package that includes all the necessary components for flight, meaning you can start flying it right out of the box without any additional ASSEMBLY/SETUP & PROGRAMMING/CONFIGURATION required. Typically, an RTF drone includes the drone itself, a radio transmitter & receiver, FPV goggles, a battery, and a charger.
(RTF) ready-to-fly drone includes some setup, tuning, and configuration like binding, radio calibration, motor configuration, motor direction, motor ordering, video transmitter setup, camera setup, OSD setup, GPS setup, Flight modes setup, ESC calibration, and FPV goggles setup.
If you are facing any problems in buying or building your drone then you can consult our drone expert they will guide you on your problem like which parts to choose, and what will be the best drone/parts in your budget.
Why you should consult with our drone experts
i. For any Doubt
ii. For any Advice & others
Overall, consulting with drone experts can help you make informed decisions, mitigate risks, and optimize the performance of your drone for your specific needs and objectives.
Book your slot now:
Consult with Our Drone Expert