Volador VX3.5 Freestyle 4s Analog FPV Drone - PNP

NOTE: If you buy any PNP Drone from our website and any part of your drone got damaged while you are using it then we will arrange those parts for you and if that parts manufacturing has been stop then we will provide you reference product.

DON’T JUST FLY DRONE, CRASH THEM TOO BECAUSE WE ARE HERE FOR YOU.

IMPORTANT NOTES:

• This is fully programmed PNP Drone, if you want us to program Radio Transmitter and Goggles then you have to buy it separately and you have to contact us and inform that you want us to program them too.

• When you get your PNP drone, without unboxing you have to contact customer support then you will get connected with drone expert and then drone expert will check all the connections then you can fly your drone.

• PNP drones are designed for FPV Drone lovers. These drones typically come with most of the essential components pre-installed, they do not include a transmitter and receiver, goggles, battery, battery charger and configuration/Programming.

• GOPRO Mount not included.

• If you select a radio transmitter with programming, a dedicated video will be sent to you which will briefly explain which mode is setup on which switch of your radio and how you will operate your drone.

Volador VX3.5 Freestyle 4s Analog FPV Drone – PNP

Features:
• The new CNC aluminium camera plates effectively protect the camera.
• Configure your FC and ESC via Bluetooth on your phone and Experience wireless fully configuration anytime & anywhere.
• The frame is made of highest quality T700 carbon fiber sheets with a super smooth surface.

Specification:

Volador VX3.5  Freestyle Frame 
Model: 3.5 inches Frame
Wheelbase: 160mm
Size: 127.5mm*148mm
TPU Colour: Tropical Mix
Arm thickness: 3.5mm
Prop size: 3.5 inch
Manual

F405 Mini BLS 35A Stack
MCU: STM32F405
USB Port Type: Type-C
Supported FC Firmware: BetaFlight(Default),INAV
UART: 6sets
Power input: 3-6s lipo
Firmware: BLHeli_S J-H-40
Configuration: Wireless Configuration
Continuous Current: 35A*4
Burst Current: 45A(5sec)
Capacitor: 35v 470uF
ESC Protocol: DSHOT300/600
Input Voltage: 3-6S Lipo
Manual

TX800 VTX
Output Power: PIT/25mW/200mW/400mW/800mW
Input Voltage: 3.7V-5V
Antenna: MMCX
Manual

Phoenix 2 SP Camera
Image Sensor: 1/2.8″ Starlight COMS Sensor
Horizontal Resolution: 1500TVL
Signal System: NTSC/PAL
Power: DC 5-36V
Dimension: 19mm

MMCX-Straight Antenna V2
Gain: 2.8dBi
Frequency: 5.8GHz
Polarization: RHCP
Connector: MMCX
Colors: Yellow

Flash 2004 Motor
Model: Flash 2004
KV: 2900KV
Input Voltage: 4S Lipo
Colour: Black

Propeller
Size: 35X25
Colour: Grey
Type: Tri blade

PACKAGE INCLUDE:
1x Volador VX3.5 Freestyle Frame
1x F405 Mini BLS 35A Stack
1x TX800 VTX
1x Phoenix 2 SP Camera
1x MMCX-Straight Antenna V2
4x Flash 2004 Motor
1x Propeller Set
1x 200mm Battery strap
1x TPU Base Mount

Recommended items:

Radio transmitter and Receiver:
Radiomaster Zorro ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
Range 3-10km

Radio Transmitter battery:
Radio master 900mah 3.7v Li-ion cell for zorro radio controller (2pcs)

Goggles:
VR009 5.8GHz 40CH 3 Inch FPV Goggles
Range: under 1km
008D 5.8G 40CH FPV Goggles For Drones
Range: under 1km

Battery:
Orange 4S 14.8V 850mAh Lipo Battery with XT60 
Flight Time 7-8min
Speed 70km/h

Battery Charger:
iMAX B6AC Lipo Battery Professional Balance Charger
Charge Current: 6A
Cell count: 2-6s
IMAX B6 80W 6A Charger/Discharger 1-6 Cells + DC 5A 12V 60W ADAPTER AC
Charge Current: 6A
Cell count: 2-6s

Propeller:
HQProp T3.5X2.5X3 Grey（2CW+2CCW)-Poly Carbonate

Antenna for Goggles:
RHCP RP-SMA 5.8G 2.8dBi Lollipop Antenna(Long)
Patch Antenna RP SMA 5.8GHz Triple Feed

Action Camera/TPU Mount:
RunCam Thumb Pro Action Camera
RunCam Thumb Action Camera
3D Printed Vertical Fixed Mount for Thumb Pro

Accessories/Tools:
75cm Diameter Fast-fold Landing Pad/Helipad For Drone
Allen Key 1.5mm
Allen Key 2mm
Allen Key 2.5mm
35W 230V Soldering Iron (Rajshri)
Solder Wire 27gm
Wire Cutter/Stripper 150mm – Taparia

PROGRAMMING/CONFIGURATION/SET-UP

FPV Drone Programming is the process to set-up drone hardware of software.
The hardware we use is only assembled on the PNP kit but not configured.
If it does not have configuration then it will not fly.
To make it ready to fly, we have to do some setup, tuning, configuration like binding, radio setup and calibration.

You can get programming on PNP Drone, radio transmitter/receiver and on goggles.
you will get motor configuration, motor direction, motor ordering, video transmitter, camera OSD, GPS, Flight controller, ESC, Drone calibration on PNP Drone only if you choose programming.

WHAT WILL YOU GET ON RADIO TRANSMITTER PROGRAMMING
• BINDING
• CALIBRATION
• MODE
Receiver will be installed on your PNP drone.
You will get this only if you choose PNP Drone with Radio Transmitter & Receiver and Programming.

WHAT WILL YOU GET ON GOGGLES PROGRAMMING
• CHANNEL & BAND Set up
you will get this function on OSD Goggles.
You will get this only if you choose PNP Drone with Radio Transmitter & Receiver, Goggles and Programming.

If you choose all options then you will get complete programmed ready to fly drone. In this you just have to plug battery and fly your drone.

WHAT WILL YOU GET ON DEFAULT PROGRAMMING

For Radio Transmitter
MODE – Arming
MODE – • Angle• Horizon• Acro-Trainer
MODE – Beeper Mode
You will get this by default and you can also change it.

For Goggles
BAND A CHANNEL 1
OSD – • AVERAGE CELL VOLTAGE• VTX Power• Flight Mode• Aircraft Mode• Arming/Disarming
You will get this by default and you can also change it.

For PNP Drone
VTX – Band A & Channel1
MAX POWER – 800mw
You will get this by default and you can also change it.

If you do not select programming you will receive only the assembled PNP drone and if you select Radio transmitter/Receiver and goggles then you will get sealed packed without programming.

We pre-check all the products before sending it to you and if you do any kind of changes and damage it during configuration then we are not responsible for that.

NOTE 1 – Product Images are shown for illustrative purpose only and may differ from actual product.