XF5804 PRO 5.8G 48CH 25/200/600mw Switchable Transmitter.

1. Frequency and Channels: The transmitter operates on the 5.8GHz frequency band, which is commonly used for video transmission in FPV. It supports 48 channels, providing flexibility to choose a frequency with minimal interference.

2. Power Output Levels: The transmitter has switchable power output levels of 25mW, 200mW, and 600mW. This allows the user to adjust the power based on the specific requirements of their FPV setup. Lower power settings are often used for close-range flying to reduce interference, while higher power settings are used for longer-range applications.

3. Switchable Power Levels: The ability to switch between different power levels provides adaptability for various flying conditions. For example, a lower power setting may be suitable for racing or indoor flying, while a higher power setting might be necessary for long-range flights.

4. Channels and Bands: The transmitter supports 48 channels, likely spread across different bands. The user can manually select the desired channel and band to avoid interference with other nearby FPV systems.

5. PRO Version: The "PRO" designation might indicate additional features, improvements, or a more advanced version of the transmitter compared to previous models.

6. Compatibility: The XF5804 PRO is designed to be compatible with FPV systems, cameras, and other equipment that operate on the 5.8GHz frequency.

Features:
Output power @transmission distance:
Approx 0.5km@25mW
Approx 1km@200mW
Approx 2km@600mW
Power transmission:25mW/200mW/400mW/600mW
PIT maintenance station mode is also supported
Supports the standard 48-channel set
Video format: NTSC/PAL
Suitable for CC3D NAZE32 F3 F4 Flight Controller (Installs In Stack)
Parameter setting mode: Press / OSD / betaflight
Antenna Connector: MMCX
Cable connector: JST.6pin
Installation hole distance: 30.5mm

Package Included :
1× XF5804 PRO 5.8G 48CH 25/200/600mw Switchable Transmitter

Specification: