Skip to product information
1 of 1

Hi Tech xyz

SP Racing F3 Flight Controller Integrate OSD Deluxe Version

SP Racing F3 Flight Controller Integrate OSD Deluxe Version

SKU:45522

Regular price Rs. 4,429.00
Regular price Sale price Rs. 4,429.00
Sale Sold out
Shipping calculated at checkout.

(Including GST)

View full details

NOTE:- We might take 4 to 8 days to ship this product.

SP Racing F3 Flight Controller Integrate OSD Deluxe Version is designed to give awesome flight performance based on tried and tested sensors while also providing unparalleled and I/O capabilities in a small and extremely lightweight form-factor using a next-generation CPU. Integrated OSD, buzzer, I2C port, sonar, battery monitoring, programmable LED, broad RC receiver, etc. A good choice for you.

The Deluxe F3 Flight Controller with OSD was designed to give outstanding flight performance based on tried and tested sensors while providing unparalleled I/O capabilities in a small and extremely lightweight form-factor using a next-generation CPU.

The difference between Acro and the Deluxe version is:

Acro: Standard model for racing/acro flying.
Deluxe: Additional sensors for altitude and direction.

Integrated On-Screen Display uses MWODS firmware and is compatible with flight controllers running Cleanflight, Beta flight & Baseflight. Space-saving design uses an external USB-TTL adapter (included) for the Flight controller and OSD setup.

The Deluxe F3 gives you all the features you need for the heart of your drone, whether you’re into FPV racing, acrobatic flying or aerial photography it’s perfect.

Note:

Since this is an Open Source Flight Controller Board, there are many manufacturers who are supplying this product. We have picked up the best quality products from the market and tested them for their functionality. And finally selected best amongst them. Our product works exactly same as we have described above in the description.

Features:

High-Capacity Flash
2x 8pin JST-SH sockets (PPM, PWM, Serial RX, GPIO, ADC, 3V, 5V, GND)
1x 4pin JST-SH socket for SWD debugging
1x 5pin JST-SH socket for Flash firmware and Configuration (Connect to the CP2104 UART to USB tool)
 8x 3pin through-holes for pin headers for ESC/Servo connections
4x 2pin through-holes for pin headers for 1x serial port and i2c port
OSD function, support KVteam MWOSD firmware
Supports OSD features such Basic Volts, Amps, timer & RSSI.
Full support for OneShot ESCs for easy PID tuning and a sharper response
Dedicated I2C port for connection of OLED display
Battery monitoring ports for voltage and current
Sonar support for precision low-altitude hold
Buzzer port for audible warnings and notifications
Symmetrical design for a super tidy wiring
Dedicated output for programmable LEDs – great for orientation, racing and night flying
Developer friendly debugging port (SWD) and boot mode selection, unbreakable bootloader
Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers
Barometer mounted on the bottom of the board for easy wind isolation
Loop times up to ~2x as fast as previous-generation STM32F1 based boards
Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux)
Supports a variety of drones such as aircraft, tricopters, quadcopters, hexacopters, octocopters and more
8x 1pin through-holes for pin headers for battery voltage/buzzer/Video in/Video out compromise I/O. You can use all the features all the time
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in)
On-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without guesswork
Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core
Stackable design – perfect for integrating with power distribution boards. 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.

Packages Includes:

1× SP Racing Deluxe Version flight controller integrate OSD
1× Protective case
1× CP2104 USB to TTL.
4× Connection cable
4× Required Burg Pins
1× Screw set

Specification:

Model SP Racing F3 OSD-Deluxe
Input Voltage (V) 5VDC
Firmware Support KVteam, MWOSD firmware
Sensor MPU6050-Accelerometer/Gyro, MS5611 barometer, HMC5883 compass
Processor STM32F303 CPU, 72Mhz inc FPU
Dimensions (LxWxH) mm 36 x 36 x 5 (without shell)
Weight (g): 20 with Shell
Shipping Weight 0.04 kg
Shipping Dimensions 5 × 3 × 2 cm