A radio-controlled (RC) plane kit without a Transmitter (TX) typically includes the essential components needed to build a functional remote-controlled aircraft. Here's a general description of what you might find in such a kit:
-
Airframe Components:
- Fuselage: The main body of the aircraft that houses the electronics and other components.
- Wings: The primary lifting surfaces of the plane.
- Tail Surfaces (Horizontal and Vertical Stabilizers): Control surfaces that help stabilize the aircraft during flight.
-
Hardware:
- Screws, Bolts, and Nuts: Various fasteners for assembling the airframe.
- Linkages and Control Horns: Components for connecting the control surfaces to the servos.
-
Electronic Components:
- Servos: Small motorized devices that control the movement of the control surfaces (elevators, ailerons, rudders, etc.).
- ESC (Electronic Speed Controller): Regulates the speed of the electric motor.
- Motor: Provides the propulsion for the aircraft.
- Battery: Powers the electronic components, usually a LiPo (Lithium Polymer) battery.
- Wiring and Connectors: Allows for the connection of electronic components.
-
Other Accessories:
- Propeller: Generates thrust for the aircraft.
- Landing Gear (if applicable): Supports the plane during takeoff and landing.
- Decals or Covering Material: Adds aesthetic appeal and provides some protection to the airframe.
-
Instruction Manual:
- Detailed instructions for assembling the components and setting up the aircraft.
-
Not Included:
- Transmitter (TX): The remote control device used to pilot the aircraft. It's not included in the kit without a TX.
-
Recommended Additional Items (Not Always Included):
- Receiver (RX): Needed to receive signals from the transmitter.
- Radio System Batteries: Usually AA or AAA batteries for the transmitter.
Package Includes:
1× 1000KV A2212/13T Brushless Motor With Bullet Connector for Drone & RC Plane
1× 1045 ABS Black HD Propellers 1CW+1CCW - 1pair
1× Readytosky 2-6S 40A OPTO ESC for Drone
4× Tower Pro 9g Micro SG90 180° Nylon Gear Servo Motor (Original Tower Pro)
Choose an Option:
1× FlySky FS-ct6b 2.4G 6CH Radio Transmitter with FS-R6B 6CH Receiver
1× FlySky FS-i6 2.4G 6CH Radio Transmitter With FS-iA6b Receiver
1× Flysky FS-i6x 2.4GHz 10CH AFHDS 2A Radio Transmitter With FS-iA10B 2.4GHz 10CH Receiver
1× FlySky FS-i6s 2.4G 10CH Radio Transmitter With FS-iA10b 10CH Receiver
Recommended Parts For This RC Plane:
Battery Charger
B3 2-3s Lipo Battery Balance Charger
Battery Strap
20cm Lipo Battery Strap Belt For Drone
Battery Voltage Tester
Lipo Battery Voltage Tester Low Voltage Alarm Buzzer For Drone
Battery
11.1V 2200mAh 3S 25C Lipo Battery With XT60 Plug (Brand ABSD)
11.1V 2200mAh 3S 30C Lipo Battery with XT60 Plug (Brand Orange)
11.1V 2200mAh 3S 35C Lipo Battery With XT60 Plug (Brand Bonka)
