An RC Plane Kit that includes the FlySky i6 typically provides you with the components needed to assemble a remote-controlled aircraft along with the FlySky i6 transmitter. Here's a breakdown of what you might find in such a kit:
1. Airframe Components:
- Fuselage: The main body of the aircraft that houses the electronics and other components.
- Wings: The primary lifting surfaces of the plane.
- Tail Surfaces (Horizontal and Vertical Stabilizers): Control surfaces for stability during flight.
2. Hardware:
- Screws, Bolts, and Nuts: Various fasteners for assembling the airframe.
- Linkages and Control Horns: Components for connecting the control surfaces to the servos.
3. Electronic Components:
o Servos: Small motorized devices that control the movement of control surfaces (elevators, ailerons, rudders, etc.).
o ESC (Electronic Speed Controller): Regulates the speed of the electric motor.
o Motor: Provides propulsion for the aircraft.
o Battery: Powers electronic components, typically a LiPo (Lithium Polymer) battery.
o Wiring and Connectors: Allows for the connection of electronic components.
4. FlySky i6 Transmitter:
- Transmitter (TX): The remote control device used to pilot the aircraft.
- Receiver (RX): Included or compatible with the FlySky i6, receives signals from the transmitter.
- User Interface: The i6 features an LCD screen, control sticks, and various buttons for navigating menus and adjusting settings.
- Channels: The i6 typically supports 6 channels, allowing control over various functions on the aircraft.
5. Other Accessories:
- Propeller: Generates thrust for the aircraft.
- Landing Gear (if applicable): Supports the plane during takeoff and landing.
- Decals or Covering Material: Adds aesthetic appeal and provides some protection to the airframe.
6. Instruction Manual:
- Detailed instructions for assembling the components, setting up the aircraft, and programming the FlySky i6 transmitter.
7. Recommended Additional Items (Not Always Included):
- Radio System Batteries: Usually AA or AAA batteries for the transmitter.
Package Includes:
1× 1000KV A2212/13T Brushless Motor With Bullet Connector for Drone & RC Plane
1× 1045 ABS Black HD Propellers 1CW+1CCW - 1pair
1× Readytosky 2-6S 40A OPTO ESC for Drone
4× Tower Pro 9g Micro SG90 180° Nylon Gear Servo Motor (Original Tower Pro)
1× FlySky FS-i6 2.4G 6CH Radio Transmitter With FS-iA6b Receiver
Recommended Parts For This RC Plane:
Battery Charger
B3 2-3s Lipo Battery Balance Charger
Battery Strap
20cm Lipo Battery Strap Belt For Drone
Battery Voltage Tester
Lipo Battery Voltage Tester Low Voltage Alarm Buzzer For Drone
Battery
11.1V 2200mAh 3S 25C Lipo Battery With XT60 Plug (Brand ABSD)
11.1V 2200mAh 3S 30C Lipo Battery with XT60 Plug (Brand Orange)
11.1V 2200mAh 3S 35C Lipo Battery With XT60 Plug (Brand Bonk
