Matek PDB-XT60 with BEC 5V and 12V Power Distribution Board has been engineered to provide the highest possible performance and reliability in a 36x50mm, 4-layer PCB. It comes with an XT60 for easy connection to LiPo batteries.
Using BECs it distributes power from 3~4S LiPo packs to 6 ESCs, as well as providing synchronized and regulated DC 5V outputs for RC Receivers, Flight controllers, OSD, and Servos.
It also provides linear regulated DC 12V for powering Cameras, Servos, RC receivers, Flight Controllers, Video Transmitters, LEDs, etc. It offers an XT60 socket to connect the LiPo pack conveniently.
The PDB-XT60 with BEC 5V and 12V is a great package to get your Racing Drones powered up for racing.
Note:
Many manufacturers supply this product since this is an open-source power distribution board. We have picked up the best quality products from the market and tested them for their functionality. And finally selected the best among them. Our product works exactly the same as we have described above in the description.
Features:
4 layers and 1.6mm PCB
Built-in XT60 Socket
A total 6 pairs of ESC solder tabs are fit for an H or X-type frame
5V and 12V Output LED indicators
Regulated 5V and 12V outputs
BEC 5V output: 5V/2A (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn= 16V, VOut= 5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output (4S LiPoly, 13~18V DC): 12V/500mA (Max.0.8A 5s/minute)
BEC 12V output (3S LiPoly): =3S LiPoly voltage – 1V
Package Includes:
1× PDB-XT60 W/BEC 5V and 12V board
1× XT60 male Connector
Specification:-
| Brand |
Mateksys |
|---|---|
| Track Material |
2oz Copper |
| Short Circuit Tolerant Voltage(V) |
9 to 18 |
| Output Continuous Current |
25A @4 and 15A @6 |
| Output Peak Current(for 10 seconds) |
30A @4 and 20A@6 |
| Length (mm): |
36 |
| Width (mm): |
50 |
| Height (mm): |
4 |
| Weight (g): |
11 |
| Shipping Weight | 0.016 kg |
| Shipping Dimensions | 6 × 8 × 2 cm |
