JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe
JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe
SKU:1272172
(Including GST)
NOTE:- We might take 4 to 8 days to ship this product.
This is a JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe.
JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Flight Controller ARCO was designed to give awesome flight performance based on tried and tested sensors whilst also providing unparalleled I/O capabilities in a small and extremely lightweight form factor using a next-generation CPU
A flight controller (FC) is a small circuit board of varying complexity. Its function is to direct the RPM of each motor in response to input. A command from the pilot for the multi-rotor to move forward is fed into the flight controller, which determines how to manipulate the motors accordingly.
Every part of the drone is controlled by a flight controller. It moves the drone by changing the RPM of the motors. It is a control system that takes input from the sensors and makes the drone fly accordingly. This is a small computer board with various sensors that understand the movement of the craft. It has sensors like Gyroscope, Accelerometer, Barometer, and Magnetometer. The signal comes from the transceiver, which controls the motors and craft.
The board is rock solid and gives great performance with the HAKRC 20 A ESC, except that you have to switch the motors 1 & 2 to get the motor connections right. The barometer does not work great. Even though I packed a sponge above it, it starts bouncing hard when I switch on ALT hold mode. The OSD is the best and it works flawlessly, as does the VCC feed, which gives you the actual battery voltage reading through betalight. Else all great, good light and powerful board for a micro build.
Features:
Compact In size
Colour: Black
Easy to install
The high-performance flight controller module
very used to product
Dail 150, Dail 300, Dail 600
Note: The BMI 270 gyroscope only supports 4.3.0 firmware. Please do not flash the other version’s firmware.
Package Include:
1× JHEMCU F4 NOXE V3 Flight Controller
Specification:-
Item Type: |
Flight Controller |
---|---|
Model |
F4 NOXE V3 |
Main control (MCU) |
STM32F411CEU6/100 MHz |
Sensor |
BMI 270/Gyro/Accel |
Video Overlay (OSD) |
AT7456E |
Barometer |
Yes (Deluxe version only) |
Black Box (Black Box) |
16MB (Deluxe Edition only) |
Input voltage |
Input voltage: 2S-6S (7.4V-26V) |
5V-BEC |
5V/2.5A ± 0.1V |
10V-BEC |
10V/2A+0.1V |
Receivers |
ELRs (CRSF), TBS (CRSF), SBU, IBU, DS M2, DS MX |
HD Interface |
yes |
UART |
UART 1, UART 2 |
LIC |
IIC1 |
LED strip |
yes |
Buzzer |
support 5V active |
ESC signal (ESC signal) |
PWM, Oneshot125, Oneshot42, Multishot, |
USB |
Micro USB |
Firmware |
Betaflight_4.3.0 JHEF 411.HEX |
Mounting holes |
20 x 20 x 3mm |
Size |
27 x 27 x 5mm |
Weight (g): |
4.3g |
Shipping Weight | 0.017 kg |
Shipping Dimensions | 6 × 6 × 2 cm |