Holybro X500 V2 Kits (Included Motor, Prop and ESC)

NOTE:- We might take 4 to 8 days to ship this product.

The X500 V2 ARF (Almost Ready-to-Fly) Kit is an affordable, lightweight, and robust carbon fibre professional drone kit that is easy to assemble (less than 15 minutes). It comes with the X500 V2 Frame Kit and motors, ESCs, power distribution boards and propellers preinstalled. It is perfectly compatible with various flight controllers such as the Holybro Pixhawk series, Durandal, Pix32 V5, etc. There are numerous improvements compared to the previous model.

The X500 V2 Frame Kit is made with full carbon fibre twill, with carbon fibre tube arms supported by the newly designed fiber-reinforced nylon connectors with convenient notches on both motor and body sides, providing a much easier & more straightforward installation. The landing gear consists of 16mm & 10mm diameter carbon fibre tubes with connectors that have been thickened and strengthened.

The spacing between the top and bottom carbon fibre plates has been increased to provide easier access. The platform board now has mounting holes for GPS & popular companion computers such as the Raspberry Pi 4 & Jetson Nano. The adjustable battery mounting board has been enlarged to support bigger batteries for longer flight times. The rail mounting system is ready to take a whole host of camera mounts and gimbals for various applications. There is an optional mount for various depth cameras such as the Intel RealSense series & Structure Core Depth Cameras (purchased separately). All tools for installation are provided in the box.

Features:

New design and minimal assembly time (~15 minutes)
Carbon Fiber frame with fibre-reinforced nylon connectors providing easy & straightforward installation.
Pre-installed motors & ESCs with simple XT30 power plugs for PDB
Power distribution board (PDB) with XT60 & XT30 plugs – no soldering needed
Mount for companion computers such as Raspberry Pi & Nvidia Jetson Nano
Optional depth camera mount for Intel RealSense & Structure Core
Mechanical Specification:
Wheelbase: 500mm
Motor mount pattern: 16x16mm
Frame Body: 144x144mm, 2mm thick
Landing gear height: 215mm
Space between top and bottom plates: 28mm
Weight: 610g
Flight time: ~18 minutes hover with no additional payload. Tested with 5000mAh Battery.
Payload: 1500g (without Battery, 70% Throttle)
Battery Recommendation: 4S 3000-5000mAh 20C+ with XT60 Lipo Battery (Not Included)

Package Include:

X500 V2 Frame Kit
With Preinstalled Items:
Motors – Holybro 2216 KV920 Motor (4 pcs) with XT30 Plug (Motor Specification can be found here)
4× ESCs – BLHeli S ESC 20A
6× 1045 Propellers
Power Distribution Board – XT60 plug for battery & XT30 plug for ESCs & peripherals

Specification:-