NOTE:- We might take 4 to 8 days to ship this product.
Holybro RemoteID Module is a low-cost, small-size, and lightweight module that broadcasts information about UAVs in flight through WiFi and Bluetooth. It supports both CAN and serial protocols. It is an FCC and CE-approved radio module. The products run open-source firmware (ArduRemoteID) and provide a so-called standard Remote ID solution, primarily targeting drone manufacturers & system integrators.
Note: This product is designed for the Standard Remote ID Solution, primarily targeting drone manufacturers and system integrators, as you need to do your own approval process at the FAA (DoC submission) if you are in the USA. For the most accurate and latest information related to this topic, please refer to the official governance website of your country.
Features:
Remote ID Broadcasting: Low-cost module broadcasting UAV flight data via WiFi and Bluetooth.
Protocol Support: Supports CAN and serial protocols for versatile connectivity.
Regulatory Compliance: FCC and CE-certified, designed for Standard Remote ID Solution.
Open-Source Firmware: Runs on Espressif ESP-C3 with ArduRemoteID firmware.
Compact and Lightweight: Small form factor with CNC case, antenna options, and M2 screw mount.
Upgradeable and Versatile: Supports firmware upgrades via web interface, compatible with PX4 & Ardupilot.
Package Include:
1× Remote ID
1× Antenna
1× JST GH 6pin 150mm Cable
1× JST GH 4pin 150mm Cable
Specification:-
| Radio module | 1. Espressif ESP-C3 module. |
| 2. Bluetooth and WiFi 2.4GHz (ERP): + 20 dBm (100 mW) | |
| 3. FCC & CE certified radio module | |
| Firmware | 1 ArduRemoteID |
| 2. Supports upgrading firmware via the web interface (“OTA”) | |
| 3. Supported in PX4 & Ardupilot | |
| Protocols | CAN & Serial |
| Interface | 1. 1x JST GH 4-pin CAN (CAN) port |
| 2. 1x JST GH 6-pin TELEM (UART) port | |
| Antenna Connector type | 1. On CNC Case: SMA connector |
| 2. On PCB: IPEX Connector | |
| Range | 5km detection range |
| Power | 5V supplied from TELEM or CAN port |
| LED lights | Bright RGB status LED |
| Size | 1. Without case: 35.3 x 23.5 mm (not including antenna) |
| 2. With CNC case: 38 x 26.5 x 11.5 mm (not including antenna) | |
| Mount | M2 screws |
| Operating temperature | -40°C to +85°C |
| Weight | 1. PCB only: 4 g |
| 2. With CNC case & Antenna: 27.5g | |
| 3. Without case & Antenna: 16.5g (Cable 20cm) | |
| Certification | FCC& CE |
| Shipping Weight | 0.45 kg |
| Shipping Dimensions | 13 × 9 × 3 cm |
