NOTE:- We might take 4 to 8 days to ship this product.
PM03D provides regulated power supply as well as current consumption and battery voltage measurements via I2C digital protocol all through a 6pin 2.00mm CLIK-Mate cable. Compatible with a flight controller that uses an I2C power monitor such as the Pixhawk 5X and up.
It is designed for multi-rotors like the X500 V2. It has both XT-30 & XT-60 connectors preinstalled for motor ESCs and Battery, as well as two 5V BEC and a selectable 8V/12V output for different kinds of peripheral devices.
The full setup guide can be found here.
This PM uses I2C digital signal data output, Compatible with Pixhawk 5X/6X Series.
NOT compatible with flight controller that uses analog PM such as the Pixhawk 6C & Mini, Pixhawk4 & Mini, pix32 v5, or Durandal flight controllers.
Power Module Comparison Table
Features:
Plug & play, no additional setup required for QGroundcontrol & Mission Planner
XT-30 connectors and solder pads for easy motor ESC connection
Onboard voltage regulators: two 5.2V & one selectable 8V/12V
5V/A ports for powering companion computers or peripheral devices
Selectable 8V or 12V triple row pin header for powering peripheral device.
Package Includes:
1× PM06 board
1× 80mm XT60 connector wire (pre-soldered)
1× Electrolytic capacitor: 220uF 63V (pre-soldered)
1×2.0mm pitch CLIK-Mate 6pin cable (To power flight controller)
1× 4pin JST GH to USB Type C
1× 4pin JST GH to barrel plug (2.1*5.5mm)
1× 4pin JST GH to barrel plug (2.5*5.5mm)
1× 4pin Pin Dupont Cable (2pc)1× Nylon standoffs & nuts
Specification:-
| Item Type: |
Module |
|---|---|
| Input Voltage (V) |
6S battery |
| Rated Current (A) |
60 |
| Max Current (A) |
120A (<60 sec) |
| Mounting Hole (mm) |
45×45 |
| Shipping Weight | 0.0 kg |
