NOTE:- We might take 4 to 8 days to ship this product.
Holybro Micro M10 GPS With Case uses multi-constellation GNSS powered by u-blox M10, a concurrent GNSS receiver that can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS, Galileo, GLONASS, and BeiDou can be received concurrently. It also comes with the IST8310 compass.
The high-gain 25 x 25 mm2 patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, a rechargeable backup battery for warm starts.
Firmware Support for M10 GPS: PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.
Features:
The newest Ublox 10th Gen GNSS
Fast & Accurate Positioning
IST8310 Compass
Small Form Factor
Package Include:
1× Micro GPS module *1
1× JST GH 6 Position Connector 15 cm
1× JST-GH 6pin Colored Silicon Cable 15 cm
Specification:-
| GNSS Receiver | Ublox M10 |
| Number of Concurrent GNSS | Up to 4 GNSS |
| – BeiDou | |
| – Galileo | |
| – GLONASS | |
| – GPS | |
| – QZSS | |
| Frequency Band | – GPS L1 |
| – Galileo E1 | |
| – GLONASS L1 | |
| – BeiDou B1 | |
| – SBAS L1 | |
| – QZSS L1 | |
| Compass | IST8310 |
| Output Protocol | – UBX (U-blox) |
| – NMEA | |
| Accuracy | 2.0m CEP |
| Nav. Update Rate | Up to 25 Hz (single GNSS), |
| Up to 10 Hz (4 concurrent GNSS) | |
| GNSS Augmentation System | EGNOS, GAGAN, MSAS and WAAS |
| QZSS: L1S | |
| Default Baud Rate | 115200 |
| Input Voltage | 4.7-5.2V |
| Port Type | JST-GH-6P |
| Antenna | 25 x 25 x 4 mm ceramic patch antenna |
| Power consumption | Less than 200mA @ 5V |
| Operating Temperature | -40~80C |
| Dimension | – 32 x 26 x 9mm (w/o Case) |
| – 34 x 28 x 11mm (With Case) | |
| Weight | – 14g (w/o Case) |
| – 16g (With Case) | |
| Shipping Weight | 0.031 kg |
| Shipping Dimensions | 12 × 9 × 2 cm |
