Holybro M10 GPS uses multi-constellation GNSS powered by the u-blox M10 series, a concurrent GNSS receiver that can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS, Galileo, GLONASS, and BeiDou can be received concurrently.
It also comes with the IST8310 compass, tricoloured LED indicator, buzzer, and a safety switch. There are 3 different connector options for different purposes. This module ships with a baud rate of 115200 5Hz.
The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna and a rechargeable backup battery for warm starts.
Firmware Support for M10 GPS:
PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.
Features:
The newest Ublox 10th Gen GNSS
Fast & Accurate Positioning
High-gain 25*25*4mm antenna
IST8310 Compass
Internal Buzzer, Safety switch
Ultra Bright UI RGB LED
Package Includes:
1× M10 GPS Module
1× Fixed Carbon Fiber GPS mount
Specifications:-
GNSS Receiver | 1. Ublox M10 |
2. Up to 4 GNSS | |
3.BeiDou | |
Number of Concurrent GNSS | 1. Galileo |
2. GLONASS | |
3. GPS | |
4. QZSS | |
Frequency Band | 1. GPS L1 |
2. Galileo E1 | |
3. GLONASS L1 | |
4. BeiDou B1 | |
5. SBAS L1 | |
6. QZSS L1 | |
Compass | IST8310 |
Output Protocol | 1. UBX (U-Blox) |
2. NMEA | |
Accuracy | 2.0m CEP |
Nav. Update Rate | 1. Up to 25 Hz (single GNSS), |
2. Up to 10 Hz (4 concurrent GNSS) | |
GNSS Augmentation System | 1. EGNOS, GAGAN, MSAS and WAAS |
2. QZSS: L1S | |
Default Baud Rate | 115200 |
Input Voltage | 4.7-5.2V |
Port Type | JST-GH-10P |
Antenna | 25 x 25 x 4 mm ceramic patch antenna |
Power consumption | Less than 200mA @ 5V |
Operating Temperature | -40~80C |
Dimension | φ50 x14.4 mm |
Weight | 32g |
Cable Length | 26cm (42cm cable purchase separately) |
Shipping Weight | 0.120 kg |
Shipping Dimensions | 14 × 12 × 5 cm |