The Holybro Kakute F4 V2.4 Flight Controller includes a plug-and-play DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash, 5V and 9V/3A BEC, easy soldering layout and much more.
The Kakute F4 V2.4 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V/A regulator designed to power your HD video transmitter like DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pads, and I2C pads (SDA & SCL) for external GPS/Magnetometers.
Features:
New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Metal-cased MOSFET for excellent heat dissipation
Massive on-board capacitance for noise filtering at 2068uf
3 oz copper PCB design to allow bigger current and better heat dissipation
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Package Include:
1× Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
1× Electrolytic capacitor: 1000uF 35v
1× 8pin to 8pin 1mm pitch 65mm cable
1× 8pin to 8pin 1mm pitch 25mm cable
1× JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
1× JST SH 6pin 100mm cable(for Caddx HD Systems)
Specification:-
| Item Type: |
Other Accessories |
|---|---|
| MCU Type |
STM32F405 |
| IMU |
MPU6000 |
| Barometer |
BMP280 |
| Battery input voltage |
2S-8S |
| BEC |
9V/3A |
| PWM output |
6 Motor Output, 1 LED |
| Mounting holes |
30 x 30mm, Φ4mm hole with M3 Grommets |
| Shipping Weight | 0.072 kg |
| Shipping Dimensions | 10 × 8 × 4 cm |
