The Holybro Kakute F4 V2.4 Flight Controller includes a plug-and-play DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash, 5V and 9V/3A BEC, easy soldering layout and much more.
The Kakute F4 V2.4 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V/A regulator designed to power your HD video transmitter like DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pads, and I2C pads (SDA & SCL) for external GPS/Magnetometers.
Features:
New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Supports DShot 150/300/600/1200/2400
Supports MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 120
Package Include:
1× Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 60A ESC
1× Electrolytic capacitor: 1000uF 35v
1× 8pin to 8pin 1mm pitch 65mm cable
1× 8pin to 8pin 1mm pitch 25mm cable
1× JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
1× JST SH 6pin 100mm cable(for Caddx HD Systems)
Specification:-
| Item Type: |
Other Accessories |
|---|---|
| Continuous Current (A): |
60A x 4 |
| Burst Current (A) |
70A x 4 |
| Supports Battery |
4-6S |
| PWM Frequency Range (KHz): |
16k to 96k |
| External Capacitor(uF) |
1000uf 35v |
| Dimensions (L x W x H) mm |
48 x 37 x 6 |
| Weight (g): |
15.7 |
| Mounting holes |
M4 30.5×30.5mm (M3 grommets included) |
| Shipping Weight | 0.075 kg |
| Shipping Dimensions | 11 × 7 × 4 cm |
