Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
SKU:1777617
(Including GST)
NOTE:- We might take 4 to 8 days to ship this product.
The Holybro Kakute F4 V2.4 Flight Controller includes a plug-and-play DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash, 5V and 9V/3A BEC, easy soldering layout and much more.
The Kakute F4 V2.4 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V/A regulator designed to power your HD video transmitter like DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, and I2C pads (SDA & SCL) for external GPS/Magnetometers.
Features:
New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 120 (V1.9 Version)
Package Include:
1× Kakute F4 V2 STACK (FC+ESC)
1× Electrolytic capacitor: 1000uF 35v
1× 8pin to 8pin 1mm pitch 65mm cable
1× 8pin to 8pin 1mm pitch 25mm cable
1× JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
1× JST SH 6pin 100mm cable(for Caddx HD Systems)
Specification:-
Item Type: |
Other Accessories |
---|---|
Continuous Current (A): |
50A x 4 |
Burst Current (A) |
60A x 4 |
Supports Battery |
4-6S |
Dimensions (L x W x H) mm |
48x37x6 |
Weight (g): |
13.8 |
Mounting holes |
M4 30.5×30.5mm (M3 grommets included) |
Shipping Weight | 0.070 kg |
Shipping Dimensions | 10 × 8 × 4 cm |