FPV NEO-M8N GPS amp Compass Support DJI Naza M V1 & V2 Lite Flight Controller

NOTE:- We might take 4 to 8 days to ship this product.

FPV NEO-M8N GPS amp Compass Support DJI Naza M V1 & V2 Lite Flight Controller.  A new generation GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy, support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.

Using a 32-bit processor, compatible with NAZA M V1 & V2 flight controller, incomparably superior to the 8-bit processor. Please take notice of the arrow on GPS, which stands for the head of a flyer. Similar calibration and usage with GPS. Coming with a soft silicone gel cable of 30cm. For softness, black rubber was wrapped on a surface. (Notice: black cable= GND, white cable=TX, yellow cable=RX, red cable=5V, 3.3-7.5V is ok), Metal foil label has been mounted on the bottom of GPS to reduce signal interference from other electronic types of equipment

 Note: To calibrate the electronic compass is the first important thing when receiving your GPS.
 Calibration Method:
Connect GPS to the Flight controller, dial the model switch of the radio control 7-10 times, LED light turns orange; Turn the flyer horizontally one circle, and then the LED light turns green; Make the head of the flyer downwards and turn it one circle, then the LED light flashed on.

Features:

Assistance AssistNow GNSS Online.
AssistNow GNSS Offline (up to 35 days)3.
AssistNow Autonomous (up to 6 days).
OMA SUPL & 3GPP compliant.
Oscillator TCXO (NEO-M8N/Q).
Crystal (NEO-M8M).
RTC crystal Built-In.
Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
Lowest noise figure (NEO-M8N/Q).
Anti-jamming Active CW detection and removal. Extra.
Onboard SAW bandpass filter (NEO-M8N/Q).
Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
Supported antennas Active and passive.
Odometer Travelled distance.
Data logger For position, velocity, and time (NEO-M8N).
RoHS compliant (lead-free).
Manufactured and fully tested in ISO/TS 16949-certified production sites.
Uses M8 chips qualified according to AEC-Q100.
Supply voltage 1.65 V to 3.6 V (NEO-M8M).
Power consumption 23 mA @ 3.0 V (continuous).
5 mA @ 3.0 V Power Save Mode.
(1 Hz, GPS mode only).
NEO-M8N-0 M8 Concurrent GNSS LCC Module.
TCXO, flash, SAW, LNA.
Time pulse Configurable from 0.25 Hz to 10 MHz.
Using a 32-bit processor, compatible with DJI NAZA LITE V1 & V2 flight controller, incomparably superior to the 8-bit processor.
Please take notice of the arrow on GPS, which stands for the head of the flyer.
Similar calibration and usage with DJI GPS.
Coming with a soft silicone gel cable of 30cm.
For softness, black rubber was wrapped on the surface.
(Notice: black cable= GND, white cable=TX, yellow cable=RX, red cable=5V, 3.3-7.5V is ok).
Metal foil labels have been mounted on the bottom of the GPS to reduce signal interference from other electronic equipment.

Package Includes:

1× FPV NEO-M8N GPS amp Compass Support DJI Naza M

Specification:-