This is a 915Mhz 100mW Radio Telemetry Kit that is based on the 3DR Telemetry kit and is 100% compatible as it runs the same firmware onboard. This firmware used by 3D Robotics is completely open-source which is, of course, the reason we can use it on our version at Unmanned Tech.
The Unmanned Telemetry Kit is compatible with Ardupilot or Pixhawk-based systems and allows you to easily add a two-way telemetry connection between your drone and ground station. This product comes with our full support and warranty as we are confident in the functionality and reliability of this item.
The full features and specifications are listed below but the main features are that both air and ground modules are now interchangeable, and each is with a USB connector and a DF13 connector. Please note that to connect to Pixhawk, it is a good idea to also purchase a 6-pos to 6-pos cable as this is easier and better than using the cable included.
The wiring is complete, and the independent housing is added. It is safer and more beautiful. The data transmission is more stable. It does not distinguish between the ground end and the air end. The two pieces are exactly the same, all with USB, and a 6-pin serial port dual TTL design, don’t need to use any tools, users can upgrade firmware by themselves.
Note:
This telemetry only could be used with APM compatible control board.
We have some variations in the colour of the connecting cable & also this product is available in two variants with casing and without casing which will be shipped randomly.
OTG cable is not included.
Features:
Small size and lightweight
CP2102 high-quality USB to TTL chips
915MHZ
Support MWC / APM / PX4 / Pixhawk other open-source flight control
MAVLink Framework Agreement
Open Source Firmware Frequency-hopping spread spectrum (FHSS)
2-way full-duplex communication adaptive TDM
Up to 25% can be corrected bit errors
Based on Si1000 and Si4432 wireless microcontroller modules.
Package Includes:
1× 3DR Radio Telemetry with the case (Air+Gnd module)
2× cables (APM/PIX).
2× 3.5dbi antennas.
Specification:-
| Item Type: |
Kit |
|---|---|
| Range |
1600 m |
| Receive sensitivity |
-117 dBm |
| Air Data Rate |
250kbps |
| Operating Temperature (°C) |
-10 to 85 |
| Weight (g): |
65 |
| Shipping Weight | 0.07 kg |
| Shipping Dimensions | 35 × 10 × 2 cm |
