4200mAh 3S 1P Li-ion Battery Pack with XT60 Plug for FPV & RC

NOTE: Product Images are shown for illustrative purposes only and may differ from the actual product.

⚠️ IMPORTANT BATTERY NOTICE

• This battery is shipped at Storage Voltage (approximately 3.6V per cell / 10.8V for a 3S pack) to ensure safe transportation and help maximize battery life.
• Do not use the battery immediately after receiving it. Before first use, fully charge the battery using a compatible 3S Li-ion charger.
• Using the battery without fully charging it may cause over-discharge, which can permanently damage the battery cells and reduce battery performance and lifespan.
• If you do not plan to use the battery for more than 5–7 days, store it at Storage Voltage (approximately 3.6V per cell / 10.8V for a 3S pack) in a cool, dry place.
• Do not store the battery in a fully charged (12.6V) or fully discharged (below 10.0V) state for extended periods, as this may reduce its lifespan.
• Always inspect the battery before use. Do not use the battery if it is swollen, damaged, punctured, or excessively hot.

Battery Specifications (4200mAh 3S1P Li-ion Battery)

• Cell Type: Molicel INR-21700-P42A
• Configuration: 3S1P
• Typical Capacity: 4200mAh
• Minimum Capacity: 4000mAh
• Nominal Voltage: 10.8v
• Storage Voltage:  10.8V
• Fully Charged Voltage: 12.6V
• Minimum Discharge Voltage: 10.0V
• Recommended Safe Discharge Voltage: 11.6V (2.9V per cell)
• Continuous Discharge Current: 45A
• Continuous Discharge Rating: 11C
• Standard Charge Current: 4.2A
• Connector Type: XT60 Plug
• Color: Black
• Dimensions (L × W × W): 75 × 45 × 45 mm
• Weight: Approximately 295g

Recommended Chargers

• ToolkitRC M6AC Charger
• ToolkitRC M7AC Smart Battery Charger for LiPo, LiHV, Li-ion, LiFe, and NiMH Batteries
• ToolkitRC M6DAC Smart Dual Input Battery Charger (700W, 25A)
• ToolkitRC M4AC Compact Charger for LiPo, LiHV, Li-ion, LiFe, and NiMH Batteries
• ToolkitRC C6 1–6S 50W 5A AC Balance Charger
• Sevenchip B6 Nova 60W 6A Smart Battery Charger with Adapter
• Sevenchip B6 Pro 120W 8A Smart Battery Charger with Adapter
• HOTA P6 600W 15A 1–6S DC Smart Battery Charger
  
• HOTRC A400 3S–3S Drone RC LiPo Battery Charger
• Radiolink CB86-PLUS High Precision Balance Charger

⚠️ Safety Instructions

• Charge this battery only with a compatible 3S Li-ion charger.
  
• For the best performance and longer battery life, stop flying when the battery reaches approximately 2.9V per cell (11.6V for a 3S pack).
  
• For long-term storage, keep the battery at Storage Voltage (approximately 14.4V.
  
• If the battery becomes excessively hot, physically damaged, swollen, or shows any signs of abnormal behavior, discontinue use immediately.
  
• Always store and use the battery in a cool, dry place, away from direct sunlight, heat sources, water, and flammable materials.
• Never short-circuit, puncture, crush, disassemble, or expose the battery to fire, as this may result in fire, explosion, or serious injury.
• Do not charge the battery above 16.8V (4.20V per cell).
• Do not discharge the battery below 10.0V (2.50V per cell), as this may cause permanent damage.

Package Includes

1x 4200mAh 3S 1P Li-ion Battery Pack with XT60 Plug for FPV & RC